2 Installation 2.2.Three Cabinet Installation ■ Cabinet Installation of the booksize unit Step 1. Install screws in the backplate. 2 Set up 2.2.4 Set up of the DC Delicate Charge Unit The following determine exhibits the diagram of using INOV-SU-30, INOV-SU-60, INOV-SU-100, slotscasino INOV-SU-170 DC gentle cost items at the side of the MD810 sequence drive unit. Page 22 2 Installation Air information plate 2200 ≥ 500 Figure 2-1 Clearance for booksize items in dual rack installation 2200 ≥ 500 Figure 2-2 Heat dissipation clearances for the big power provide unit (vertical tower format) The vertical tower items are designed to be put in vertically to enable appropriate heat dissipation.
For the electrical installation of the power supply unit, slot gacor see “810 Collection Power Provide Unit Person Information”. Single and twin rack installation is supported for the MD810 sequence drive unit. ◆ The water cooling models include the 160 kW power provide unit, 11 to 37 kW single-axis drive models, and dual-axis 7.5 to 18.5 kW drive items. EMC grounding aluminum bar (delivered with the equipment), used to attach each unit Step 5.
Fasten the screws. Page 6 Safety Directions WARNING ◆ Do not install the gear if you find injury, https://sexshop-juguete-erotico.com rust, or 78win indications of use on the tools or accessories. ◆ Before power-on, be sure that the ability supply meets tools necessities to prevent tools damage or slotscasino even a fireplace. Page 8 Safety Instructions Power-on Danger ◆ Before power-on, guantee that the equipment is put in properly with dependable wiring and slotscasino the motor could be restarted.
Follow the directions displayed to remove the jammed paper.
Standard/Booklet Maker Finisher Note If paper is torn, verify contained in the machine and take away it. Note If paper is torn, examine inside the machine and take away it. If paper is torn, check inside the machine and remove it. 6. Whereas holding the lever down, https://lasix4us.top flip over the unit and remove the staple cartridge from the unit. Paper jams at lever 3g and knob 3f Always guarantee that all paper jams, together with any small ripped pieces of paper, are cleared before proceeding along with your print jobs.
The folding choice is selected from the print driver.